Bluetooth LE SoC, QFN20, 14 GPIO – ANS-MY3003

Category:

This chip integrates a Bluetooth 5.2 + 2.4GHz (proprietary protocol) SoC. It supports BLE data rates of 1 Mbps and 2 Mbps, with a sensitivity of -96 dBm in 1 Mbps BLE mode and -92 dBm in 2 Mbps BLE mode. It features a flexible transmit power adjustment range—from -40 dBm to 6 dBm—and includes an integrated balun, which simplifies antenna output design. Furthermore, the chip supports BLE Mesh, offering expanded possibilities for network communication.

Product Specifications:

Bluetooth BT 5.2 + 2.4GHz (proprietary protocol) SoC Supports BLE data rates: 1 Mbps, 2 Mbps
Sensitivity: -96 dBm at 1 Mbps BLE mode
Sensitivity: -92 dBm at 2 Mbps BLE mode
Transmit power: -40 dBm to 6 dBm
Single-ended antenna output
Integrated balun
Supports BLE Mesh
32-bit RISC MCU High-performance (64MHz)
SMART 8-channel DMA controller
CACHE Support Scope 4KB
USB USB 1.1 full-speed operation at 12 Mbps
Supports up to 5 endpoints; endpoints 1–4 support simultaneous transmit and receive
FIFO depth for all endpoints is 64 bytes
On-chip memory 4KB ROM
Up to 32 KB of SRAM
SOP32(SIP 256KB QSPI FLASH)
Clock source Supports 16MHz crystal oscillator (XTAL)
Internal high-frequency RC oscillator (IRC): 16MHz ±2%
Ultra-low-power internal low-frequency RC oscillator (RC32K)
Internal high-frequency DPLL (48MHz/64MHz) clock
Supports external clock input
System clock (RTC) Operates using ultra-low-power technology
Driven by an internal ultra-low-power RC oscillator
Watchdog Timer Operated by an internal low-power WDT
Counter/Timer Modules 1 x Advanced 16-bit Counter/Timer (ATMR)
1 x Common 16-bit Counter/Timer (CTMR)
Supports 4 independent channels for input capture, output compare, and PWM
1 x Basic 16-bit Counter/Timer (BTMR)
Peripheral Interfaces 2 x UART, supporting RS485/IrDA/ISO7816-3, with data rates up to 3.84 Mbps
1 SPI Master interface, with a maximum speed of up to 16 Mbps
1 SPI Slave interface, with a maximum speed of up to 16 Mbps
1 x I2C bus, configurable as master/slave, supporting Fast Mode with data rates up to 400 Kbps
Analog-to-Digital Converter (ADC) 10-bit resolution, 1 Mbps ADC, 10 input channels
Voice functionality, supporting 8K sampling rate
General-Purpose I/O (GPIO) Supports up to 14 GPIOs; each I/O supports interrupt and wake-up functions.
Power Management Unit (PMU) Integrated Power-On-Reset (POR)
Integrated Low-Voltage-Detect (LVD) with a default voltage threshold of 1.65V.
Voltage Range Operating voltage: 1.8V – 5.2V (determined by the specific chip model).
Current Consumption On-chip LDO voltage regulator
44.7 µA/MHz (@3.3V with 16 MHz RC oscillator)
Deep sleep mode: 70 µA @3.3V
Power-off mode: 2 µA @3.3V
BLE/2.4G mode: Tx peak current 7.2 mA (@1.8V, 0 dBm)
BLE/2.4G mode: Rx peak current 10.3 mA (@1.8V)
ESD 4500V
Operating temperature -40°C to 105°C

Applications:

• Smart Finance

• Smart Lighting

• Smart Remote Control

• Anti-loss/Selfie Accessories

• Smart IoT

• Wearable Devices

• Electronic Shelf Labels (ESL)

• Positioning and Direction Finding

• Bluetooth Modules

LEAVE A MESSAGE