The MY3002 chip also provides USB connectivity, on-chip memory, a diverse range of clock sources, and various peripheral interfaces, catering to a wide array of connection and data transmission requirements. Regarding power management, it integrates Power-On-Reset (POR) and Low-Voltage-Detect (LVD) functions, supporting a broad operating voltage range. Furthermore, its low-power design ensures efficient energy management across different operating modes, facilitating long-term, stable performance for battery-powered devices. The MY301XS16 chip features 4500V ESD protection and operates reliably within a wide temperature range of -40°C to 105°C, making it suitable for applications in diverse environmental conditions.
Product Specifications:
| Bluetooth BT 5.2 + 2.4GHz (proprietary protocol) SoC | Supports BLE data rates: 1 Mbps, 2 Mbps |
| Sensitivity: -96 dBm at 1 Mbps BLE mode | |
| Sensitivity: -92 dBm at 2 Mbps BLE mode | |
| Transmit power: -40 dBm to 6 dBm | |
| Single-ended antenna output | |
| Integrated balun | |
| Supports BLE Mesh | |
| 32-bit RISC MCU | High-performance (64MHz) |
| SMART 8-channel DMA controller | |
| CACHE Support Scope | 4KB |
| USB | USB 1.1 full-speed operation at 12 Mbps |
| Supports up to 5 endpoints; endpoints 1–4 support simultaneous transmit and receive | |
| FIFO depth for all endpoints is 64 bytes | |
| On-chip memory | 4KB ROM |
| Up to 32 KB of SRAM | |
| SOP8(SIP 128KB QSPI FLASH) | |
| Clock source | Supports 16MHz crystal oscillator (XTAL) |
| Internal high-frequency RC oscillator (IRC): 16MHz ±2% | |
| Ultra-low-power internal low-frequency RC oscillator (RC32K) | |
| Internal high-frequency DPLL (48MHz/64MHz) clock | |
| Supports external clock input | |
| System clock (RTC) | Operates using ultra-low-power technology |
| Driven by an internal ultra-low-power RC oscillator | |
| Watchdog Timer | Operated by an internal low-power WDT |
| Counter/Timer Modules | 1 x Advanced 16-bit Counter/Timer (ATMR) |
| 1 x Common 16-bit Counter/Timer (CTMR) | |
| Supports 4 independent channels for input capture, output compare, and PWM | |
| 1 x Basic 16-bit Counter/Timer (BTMR) | |
| Peripheral Interfaces | 2 x UART, supporting RS485/IrDA/ISO7816-3, with data rates up to 3.84 Mbps |
| 1 SPI Master interface, with a maximum speed of up to 16 Mbps | |
| 1 SPI Slave interface, with a maximum speed of up to 16 Mbps | |
| 1 x I2C bus, configurable as master/slave, supporting Fast Mode with data rates up to 400 Kbps | |
| Analog-to-Digital Converter (ADC) | 10-bit resolution, 1 Mbps ADC, 8 input channels |
| Voice functionality, supporting 8K sampling rate | |
| General-Purpose I/O (GPIO) | Supports up to 10 GPIOs; each I/O supports interrupt and wake-up functions. |
| Power Management Unit (PMU) | Integrated Power-On-Reset (POR) |
| Integrated Low-Voltage-Detect (LVD) with a default voltage threshold of 1.65V. | |
| Voltage Range | Operating voltage: 1.8V – 3.6V (determined by the specific chip model). |
| Current Consumption | On-chip LDO voltage regulator |
| 44.7 µA/MHz (@3.3V with 16 MHz RC oscillator) | |
| Deep sleep mode: 70 µA @3.3V | |
| Power-off mode: 2 µA @3.3V | |
| BLE/2.4G mode: Tx peak current 7.2 mA (@1.8V, 0 dBm) | |
| BLE/2.4G mode: Rx peak current 10.3 mA (@1.8V) | |
| ESD 4500V | |
| Operating temperature -40°C to 105°C | |
Applications:
• Smart Finance
• Smart Lighting
• Smart Remote Control
• Anti-Loss/Selfie Devices
• Smart IoT
• Wearable Devices
• Electronic Shelf Labels (ESL)
• Positioning and Direction Finding
• Bluetooth Modules
